Combing Process in Spinning

Before processing cotton, wool, and silk fibers into fabrics, the process of removing impurities and short fibers in the fibers with a combing machine is called combing. The texture, washability and durability of the fabric produced through this process are greatly improved compared with carded fabrics. The following introduces the composition of the combing machine and the combing process.

The kinematic coordination relationship of the main parts on the combing machine is indicated by a dial. The disc is mounted on the combing machine and rotates synchronously with the cylinder, which is generally called the indexing disc. The index plate is divided into 40 equal parts along the circumference, and each equal part is 9°, which becomes one index.
The working cycle refers to the time interval between the combing cylinder of the intermittent combing machine corresponding to the two actions of combing the whiskers. That is: the first row of needles in the combing cylinder goes to the bottom of the jaws to the first row of needles to the bottom of the jaws again, and one work cycle is also often called a clamp time.
A movement cycle of a combing machine can be divided into four stages:

• Cylinder carding stage.
• Preparation stage before separation.
• Disengagement engagement phase.
• The preparatory stage before cylinder carding.

Cylinder carding stage

Cylinder carding starts from the first row of needles in the cylinder until the last row of needles leaves the cotton clump. At this stage, the working and movement conditions of the main parts are as follows:
Nippers: The upper and lower nippers are closed to firmly hold the barbels, and the nippers move first backwards and then forwards.
Cylinder: Comb the front end of the beard to remove short fluff and impurities.
Top comb: swing first and then forward (not involved in combing), but not in contact with whiskers.
Separation roller: in a basically static state.
Cotton feeding roller: stop feeding cotton.

Preparation stage before separation

The preparatory stage before separation starts from the end of cylinder carding to the start of separation. At this stage, the working and movement conditions of the main parts are as follows:
Nippers: The upper and lower nippers gradually open from closed, the nippers continue to move forward, and the jaws gradually open.
Cylinder: Keep turning without combing the cotton clumps.
Top Comb: Continue to swing forward and start to touch the cotton tufts.
Separation roller: From stationary to inverted, pour the cotton web into the machine, ready to be combined with the fiber bundle sent by the nipper.
Cotton feeding roller: start to feed cotton.

Disengagement engagement phase

The separation and splicing stage starts from the beginning of separation of fibers to the end of separation. The working and movement conditions of the main parts at this stage are as follows:
Nippers: The openings of the upper and lower nippers are enlarged, and continue to move forward to send the whiskers into the separating jaws.
Cylinder: Keep turning without combing the cotton clumps.
Top comb: Swing backwards, insert into the beards for combing, keep neps, impurities and short fibers in the beards behind the top comb, and be taken away by the cylinder in the next working cycle.
Separation roller: rotate clockwise, pull out the fibers sent by the nipper, and superimpose them on the end of the original cotton web for output.
Cotton feeding roller: continue to feed cotton.

The preparatory stage before cylinder carding

The preparatory stage before cylinder carding is from the end of separation to the start of cylinder carding. The work and movement of the main parts at this stage are as follows:
The preparatory stage before cylinder carding is from the end of separation to the start of cylinder carding. The work and movement of the main parts at this stage are as follows:
Nippers: The upper and lower nippers swing backwards and gradually close;
Cylinder: Continue to rotate, the first row of needles gradually approaches the bottom of the nipper, ready for combing;
Top Comb: Swing backwards and gradually break away from the cotton clump;
Separating roller: continue to output the cotton web in clockwise rotation, and gradually tend to stand still.
Cotton feeding roller: stop feeding cotton.

This article is reproduced from fyitester.com.